Common Window Seal Problems and How to Spot Them

Spotting a broken window seal can save you in long-term maintenance and repair costs, as well as a staggering heating bill.

Up to 25 to 30% of all energy loss through windows occurs due to window seal problems.

The loss of energy not only costs you money, but it is bad for the environment as well as your environment. When you waste energy in your home, it creates more emissions and adds more gases to the environment.

When you find a broken window seal, you must get it taken care of. A lot of the time, the window seals contribute to energy loss, so fixing the problem fixes your window and your bill.

Here is what to look for and how to get your window seals back in order with a bit of shape.

The Sealant Begins to Crack and Peel

One of the most common problems with window seals is that the sealant begins to crack and peel.

This can be a result of weather changes, age, or simply poor installation. If you notice this problem, it’s important to take action quickly to prevent further damage.

To spot this problem, look for cracks or peeling sealant around your windows. If you see any, use a putty knife or similar tool to scrape away the old sealant and clean the surface.

Then, apply the new sealant according to the manufacturer’s instructions. Be sure to use a sealant that is compatible with the material of your window frame.

Seal failure and Condensation

Seal failure is when the seal around the edges of the window starts to break down, resulting in gaps. This can happen due to age, wear and tear, or exposure to sunlight and heat.

Condensation can occur when there is a build-up of moisture inside the sealed unit, which can lead to mold and mildew. The best way to spot these problems is to look for signs of moisture, such as water droplets or condensation on the glass.

If you suspect that there is a problem with your window seals, it’s best to get them checked out by a professional.

Contact this window company for assistance.

The Sealant Starts to Blister

Sealant blisters can happen for some reasons. But usually, it is due to the sealant not being compatible with the window material or the environment. 

This can happen if the sealant isn’t applied correctly in the first place or if the window isn’t properly sealed. Other causes of blisters can include chemicals in the sealant, heat, or even UV rays.

To spot these problems early, keep an eye on your sealant and look for any changes in appearance. If you see blisters starting to form, you’ll need to address the problem quickly to prevent further damage.

Contact this window company for 

Common Window Seal Failures

If you have windows in your home, it’s important to be aware of the most common window seal problems. In the meantime, keep an eye out for any of the common problems described in this article.

A little bit of preventative maintenance can go a long way in preserving the condition of your windows and keeping your energy bills low. By doing so, you can also avoid more costly window repairs down the road. 

If you’re looking for other useful articles like this one, keep coming back for more!